If you have a house, it is only natural for you to have it inspected. This is also a very important activity if you are thinking of buying your own house. The inspection process may vary from state to state but they have the same purpose of ensuring the quality of the house. For this process, you should hire the services of a reputable home inspector Columbus GA.

It is important that you hire a professional to do the job. After all, they are the ones who can do the inspections for the house while bearing in mind the standards of practice that was established by the National Association of Certified Home Inspectors. They know the right information and guidelines set by the NACHI.

If you are going through with the inspection, you should be aware of the elements around the house that you have to check. There are several items that you must not skip on in the inspections. Here are a few of those items that should make up the checklist you are using for the said work.

First, you have to get the professional to look into the house’s structural elements. The structural elements of the house has a wide range. Some examples of the structural elements that must be inspected include foundation, walls, ceiling, roof, and floors. The construction as well as their strength has to be tested as well.

Exterior evaluation. The house’s exterior has to be properly evaluated. After all, the outside should be in the same excellent condition as the inside of the house. When you are inspecting the exteriors of the house to check for its condition, you have to be keen on inspecting the wall coverings, windows, doors, lights, fences, draining, driveways, grading, and driveways.

There is the all-important roof and attic as well. While the roof is a structural element of the house, there are specific parts to it that you have to take into account when inspecting. These specific parts include the gutters, flashing, ventilation, and framing. You also have to check up on the type of roof construction.

The next element you have to check up on is the plumbing. Take into consideration the identification of the pipe materials used for the plumbing. Pay attention especially to the pipes for the drain, waste, vent, and potable use. Most of the pipes are found around the traps, faucets, sinks, showers, and toilets. Look into them. Do not forget to do the sewers inspection too.

The systems and components come next. There are different systems in the house that are necessary for it to be a safe place for people to live in. There are also those systems made to make the house more comfortable. You have to check these systems and components, especially the water heaters, air conditioning, furnaces, chimney, duct work, fireplace, and sprinklers.

The electrical system should be inspected as well but you have to make sure to do it safely. When inspecting, you have to check on the main panel, circuit breakers, grounding, and even the types of wiring. You also have to check on the receptacles, exhaust fans, light fixtures, and ceiling fans. These should be in good condition if you do not want to get into troubles like fire or short circuiting.

Read more about Inspection Checklist Items For A Home Inspector.